Free PDF 2025 Reliable HPE7-A06: Exam HPE Campus Access Switching Expert Written Exam Format

Maybe you want to keep our HPE7-A06 exam guide available on your phone. Don't worry, as long as you have a browser on your device, our App version of our HPE7-A06 study materials will perfectly meet your need. That is to say that we can apply our App version on all kinds of eletronic devices, such as IPAD, computer and so on. And this version of our HPE7-A06 Practice Engine can support a lot of systems, such as Windows, Mac,Android and so on.

To avail of all these HP HPE7-A06 certification exam benefits you need to enroll in HP HPE7-A06 certification exam and pass it with good scores. Are you ready for this? If your answer is right then you do not need to go anywhere. Just download HP HPE7-A06 Dumps questions and start preparing today.

>> Exam HPE7-A06 Format <<

Free PDF Quiz 2025 Trustable HPE7-A06: Exam HPE Campus Access Switching Expert Written Exam Format

Our company pays high attentions to the innovation of our HPE7-A06 study materials. We constantly increase the investment on the innovation and build an incentive system for the members of the research expert team. Our experts group specializes in the research and innovation of our HPE7-A06 Study Materials and supplements the latest innovation and research results into the HPE7-A06 study materials timely.

HPE Campus Access Switching Expert Written Exam Sample Questions (Q69-Q74):

NEW QUESTION # 69
A senior engineer from the network operations team has reported an intermittent problem where some PoE- powered devices are randomly losing power. During your investigation, you found that port 1 of the Acc-1 switch is currently presenting the behavior shown in the CLI output for the Acc-1.

What is a probablecausa lot poor 1/1/1 is denying PoE?

A. PoE port priority sot to low
B. This switch does no! support PoE class 4.
C. switch PoE powerbudget exceeded
D. PoE was manually disabled for port 1/1/1.

Answer: C

Explanation:
The question involves intermittent PoE-powered device power loss on port 1/1/1 of an AOS-CX switch (Acc-
1), with CLI output (not provided) indicating a PoE issue. The task is to identify a probable cause.
* Analysis of Options:
* Option A:Incorrect. AOS-CX switches typically support PoE Class 4 (802.3at, 30W), sufficient for most devices.
* Option B:Correct. If the switch's PoE power budget is exceeded, it may deny power to port 1/1
/1, causing intermittent device failures.
* Option C:Incorrect. Low PoE port priority may deprioritize the port but is less likely to cause complete power loss compared to budget issues.
* Option D:Incorrect. Manual disabling of PoE would cause consistent power loss, not intermittent issues.
* Why Option B is Correct:AOS-CX switches have a finite PoE power budget (e.g., 370W or 740W, depending on the model and power supply). If the total power demand from connected devices exceeds this budget, the switch denies power to some ports, often intermittently as devices cycle or negotiate power. For port 1/1/1, this could manifest as random power loss for the connected device. The CLI output likely shows a "power denied" status (e.g., via show power-over-ethernet brief). Checking the PoE budget (show power-over-ethernet) and upgrading power supplies or prioritizing critical ports resolves the issue, aligning with HPE Aruba Networking's PoE troubleshooting guidelines.
* Relevance to Certification Objectives:
* Connectivity (9%):Troubleshooting PoE deployment issues.
* Troubleshooting (10%):Diagnosing power-related issues in campus networks.
* Switching (19%):Implementing PoE configurations for Layer 2 devices.
References:
HPE Aruba Networking AOS-CX Configuration Guide: PoE Configuration and Troubleshooting.
HPE7-A06Study Guide: Covers PoE management and diagnostics.
HPE Aruba Networking Technical Documentation: PoE Budget Troubleshooting.

NEW QUESTION # 70
Match each BGP element to its description.

Answer:

Explanation:

Explanation:

This question requires matching BGP protocol elements (mostly message types) to their primary function or description.
* OPEN Message:This is the first message sent after the TCP connection is established between BGP peers. Routers exchange OPEN messages to negotiate session parameters (AS Number, Hold Time, Router ID, Capabilities). A successful exchange leads to session establishment.
* Matches:"sets up and establishes BGP adjacency"
* UPDATE Message:This message is used to communicate network reachability information (NLRI). It carries prefixes that are being advertised, path attributes associated with those prefixes, and/or prefixes that are being withdrawn.
* Matches:"advertises, updates, or withdraws routes"
* KEEPALIVE Message:These messages are sent periodically between BGP peers within the agreed- upon Hold Time interval. Their primary purpose is to confirm that the peer is still alive and the session is active, especially when there are no UPDATE messages to send.
* Matches:"ensures that BGP peers are still alive"
* NOTIFICATION Message:This message is sent when a BGP error condition is detected (e.g., malformed message, unacceptable parameters in an OPEN message, hold timer expiry). Sending or receiving a NOTIFICATION message immediately causes the BGP session to terminate.
* Matches:"indicates error condition to a BGP neighbor"
* Route Refresh:This is a BGP capability (defined in RFC 2918) that allows a BGP speaker to request its peer to resend its routing updates for a specific address family, typically used after a policy change without requiring a full BGP session reset.
* Matches:"request a BGP peer to resend updated messages"
References:RFC 4271 (BGP4 Specification - Section 4, Messages), RFC 2918 (BGP Route Refresh Capability). This relates to the "Routing" (16%) objective.

NEW QUESTION # 71
Ever since a recent firewall change at your WAN/lnternet edge, the 8GP state in your VSX pair has not returned to Established. What should you check to restore BGP functionality at the site?

A. Confirm that BGP Peer AS has not changed.
B. Confirm that appropriate TCP ports are still allowed.
C. Restart the routing service so thatBGP auto-discovers its neighbors.
D. Restart NAT service for the BGP interface.

Answer: B

Explanation:
The BGP state on a VSX pair is stuck (not 'Established') after a recent firewall change at the WAN/Internet edge, where the BGP peering likely occurs.
* BGP and Firewalls:BGP establishes sessions usingTCP port 179. Firewalls located between BGP peers must explicitly permit TCP port 179 traffic bidirectionally for the peering to establish and maintain. Firewall changes are a frequent cause of broken BGP sessions.
* Troubleshooting Steps After Firewall Change:The most logical first step is to verify that the firewall change did not inadvertently block TCP port 179 between the configured BGP neighbor IP addresses.
* Analysis of Options:
* A: Restarting routing service is disruptive and not the first step.
* B: Confirming that appropriate TCP ports (specifically 179) are still allowed through the firewall directly addresses the most probable cause related to the firewall change event.
* C: Restarting NAT service is likely irrelevant unless NAT is incorrectly configured for BGP peers.
* D: Confirming the peer AS is a basic configuration check but less likely related to thefirewall changeevent than port blocking.
* Conclusion:Given the problem occurred immediately following a firewall change, verifying that the firewall still permits TCP port 179 between the BGP peers is the most direct and likely troubleshooting step.
References:BGP protocol specifications (RFC 4271), Firewall management principles, Network troubleshooting methodology. This relates to "Routing" (16%), "Security" (10%), and "Troubleshooting" (10%) objectives.

NEW QUESTION # 72
Refer to the exhibit and cede sample.

What is the effect when you add thestatement "neighbor 10.2.0.3 send-community both" to the ipv4 address family? (Select two.)

A. It causes R1 to negotiate the ability to send and receive standard and extended communities with R2.
B. Itcauses R1to allow the exchange ofcommunities with NLRI records in both inbound and outbound direction
C. The feature will be enabled without consequence to the R1established session with R2.
D. It causes R1to negotiate for the ability to import and export all type-1 and lype-2 communities with R2.
E. It will cause existing BGP peering between R1and R2 to flap.

Answer: A,E

Explanation:
The question asks for the effects of adding the command neighbor 10.2.0.3 send-community both to the BGP configuration under the IPv4 address family context for neighbor R2 (10.2.0.3) on router R1.
* send-community both:This command instructs R1 to send both standard (RFC 1997) and extended (RFC 4360) BGP community attributes to neighbor R2. By default, communities are not sent.
* BGP Capability Negotiation:Adding or changing features like community advertisement modifies the BGP capabilities exchanged between neighbors during session establishment. Any change to these capabilities requires the BGP session to be reset (flap) so that the peers can renegotiate using the new capabilities.
* Analysis of Options (Select Two):
* A: Correct (partially). It enables R1 tosendstandard and extended communities. The ability to receivedepends on the peer and local config. The capability isnegotiatedupon session reset.
* B: Incorrect. Changing capabilities requires the session to flap; it's not without consequence.
* C: Incorrect. It primarily enablesoutboundsending from R1. Inbound acceptance is implicit if the neighbor is activated.
* D: Correct. Modifying BGP neighbor capabilities, such as enabling send-community, necessitates a BGP session reset (flap) for the change to take effect.
* E: Incorrect terminology ("import/export", "type-1/type-2 communities").
* Conclusion:The command enables R1 to send communities (A describes the purpose/capability), and adding this command to an existing session will cause the session to flap for renegotiation (D describes the immediate consequence).
References:RFC 1997, RFC 4360, AOS-CX BGP Configuration Guide (communities, neighbor configuration). This relates to the "Routing" (16%) objective.

NEW QUESTION # 73
You are configuring VSX active gateway on CX 8360 campus aggregation switches when the switch prompt returns the following error: "No more than IB VMACs can be configured." What should be done to address this issue?

A. As MAC addresses are link-local, use the same VMAC across SVIs.
B. Change the switch profile to ''Leal'' to increase the number of supported vMACs.
C. Limit the number of SVIs with active-gatewayto 16.
D. Change the aggregation switch to a higher-end model, such as a CX 8400.

Answer: A

Explanation:
The error "No more than 16 vMACs can be configured" occurs when trying to configure active-gateway on multiple SVIs on a CX 8360 VSX pair. This indicates a platform limit on the number of unique virtual MAC addresses has been reached.
* Active Gateway vMACs:Each SVI configured with Active Gateway requires a virtual MAC address (vMAC). While AOS-CX can auto-generate these, doing so consumes entries from a limited hardware pool (e.g., 16 on this platform/version).
* Best Practice & Solution:The recommended best practice to conserve these limited vMAC resources is to manually specify andreuse the same virtual MAC addressacross all SVIs configured with Active Gateway on that specific VSX pair. Since MAC addresses are Layer 2 local, using the same vMAC on different SVIs (different L3 subnets) does not cause conflicts within the VSX pair's operation.
* Analysis of Options:
* A: Limiting the number of SVIs using Active Gateway is a workaround, not a solution.
* B: Changing switch profiles doesn't typically alter hardware vMAC limits.
* C: Changing to a higher-end switch model might increase limits but is not the first or standard solution.
* D: Reusing the same VMAC across SVIs (active-gateway ip <vip> mac <SAME_VMAC>) avoids consuming a new vMAC entry for each SVI, thus staying within the platform limit. This is the standard, recommended solution.
* Conclusion:The correct approach to address the vMAC limit error is to explicitly configure the same virtual MAC address for all SVIs using the Active Gateway feature on the VSX pair.
References:AOS-CX VSX Guide (Active Gateway Configuration, Best Practices, vMAC considerations).
This relates to "Network Resiliency and virtualization" (8%) and "Routing" (16%).

NEW QUESTION # 74
......

Real4test online digital HP HPE7-A06 exam questions are the best way to prepare. Using our HP HPE7-A06 exam dumps, you will not have to worry about whatever topics you need to master. To practice for a HP HPE7-A06 Certification Exam in the Real4test (free test), you should perform a self-assessment. The HPE7-A06 practice test Real4test keeps track of each previous attempt and highlights the improvements with each attempt.

Reliable HPE7-A06 Test Blueprint: https://www.real4test.com/HPE7-A06_real-exam.html

If you fail exam and want to apply refund, you just need to provide your unqualified score scanned within half years we will refund the cost on our HPE7-A06 Exam bootcamp soon, HP Exam HPE7-A06 Format As we all know, it is not enough to ensure 100% pass just by the simulated questions, the accurate answers are very necessary for successful pass, If there is any update, the newest and latest information will be added into the HPE7-A06 updated training pdf, while the old and useless questions will be removed of the HPE7-A06 actual test training.

Thank you for the professional work, however, anyone interested HPE7-A06 Exam Dumps Free in building a basic competence in the Java programming language will benefit from using this course.

If you fail exam and want to apply refund, you just need to provide your unqualified score scanned within half years we will refund the cost on our HPE7-A06 Exam Bootcamp soon.

2025 Exam HPE7-A06 Format | Professional Reliable HPE7-A06 Test Blueprint: HPE Campus Access Switching Expert Written Exam

As we all know, it is not enough to ensure 100% pass just by HPE7-A06 the simulated questions, the accurate answers are very necessary for successful pass, If there is any update, the newest and latest information will be added into the HPE7-A06 updated training pdf, while the old and useless questions will be removed of the HPE7-A06 actual test training.

Just download Real4test HPE7-A06 exam questions demo and checks out the top features of Real4test HPE7-A06 exam dumps, And you can free donwload the demos to have a look.